This is a big ceiling lamp that's not too difficult to put together.

You need

60 Connectors
15 Triangle Pieces
11 Center Pieces
5 Final Triangle Pieces
1 Top Piece
1 Bottom Socket Holder
1 Top Socket Holder

The 3mf has all parts you need, the All.STL too.

You also need to buy a socket and a bulb.
I made a universal Socket holder that fits almost anything. To know what to buy, you can watch this Video.

Print Settings

Standard no supports. But with a brim on all Lamp parts. The Connectors and the Socket Holders don't need a brim.

Assembly

I made an Assembly Video: Watch the video

Technical Data

The lamp takes roughly, 2000g of Filament and 68h to print (3 days).
I used Sunlu meta PLA. I recommend high speed PLA since it is very transparent and lighter. That means more filament per kg.